Make:
JABCO
Tool
Make:
JABCO
Tool
Price: $560.00
Model:
Type:
3-in-1 Multifunction Digital Inverter Plasma Cutter + TIG Welder + ARC (MMA)
Welder
Condition:
BRAND NEW (In Sealed Factory Box)
Status:
IN STOCK (Ships in 1-3 business days)
Warranty:
1 Year (Parts and Labor)
Features:
40 Amp Digital Inverter Air Plasma Cutter 160 Amp Digital Inverter DC ARC (MMA)
Welder Integrated Digital Display Integrated Pressure Gauge Foot Pedal Ready*
TOSHIBA Transistors (MOSFET) PAPST Advanced German Cooling System Accessories:
Plasma Torch Plasma Consumables Air Filter/Regulator TIG Torch TIG Consumables
Argon Flow Meter ARC Welding Electrode Clamp Ground Clamp Connections, etc.
Plasma
Duty Cycle: 60% at 40 amps and 100% at 30 amps
Rated Input Current: 27 amps
6" Per minute @ 3/4" Thick Steel
16" Per minute @ 1/2" Thick Steel
Air pressure: 60~95 psi
TIG
 |
Output Current: 15-160 Amps |
|
Power Usage 17 Amps @ 220VAC |
|
No Load Voltage: 62V |
|
Can Weld: Steel, Stainless, Moly, Ferrous |
|
Duty Cycle: 60% @ 160 Amps 100% @ 95 Amps |
|
High Frequency Start / HF Welding |
|
Working Voltage: 16.9V |
|
Gas Flow: 2-5L/min (using Argon) |
Arc/Stick/MMA Welding
|
Output Current: 15-160 Amps |
|
Power Usage 23 Amps @ 220VAC |
|
No Load Voltage: 62V |
|
Can Weld: Steel, Stainless, Moly, Ferrous |
|
Duty Cycle: 60% @ 160 Amps 100% @ 95 Amps |
|
High Frequency Start / HF Welding |
|
Working Voltage: 25 Volts |
Portable
(DC) DUAL VOLTAGE Multi Purpose Welder with 50-amp Plasma Cutter Operating
Automatic Dual Voltage: 208/220vac50/60HZ Input Single Phase 1PH 110/120vac
50/60HZ Input Single Phase 1PH 50amp cut draws 25Amps 40amp cut draws 22.5Amps
230V No Load Voltage, 100-115V Working Voltage Plasma
Cutting Specs: 7" Per
minute @ 3/4" Thick Steel 17" Per minute @ 1/2" Quality Cut 50
Amps Plasma cutter: Duty Cycle 60% at 50 Amps and 100% at 40 Amps. 3/4 inches
clean cut with 7.2 inches per minutes; 1.0inches severance cut with 3.1 inches
per minute. Rated Output Current is 40Amps under both AC 110V and 220V.
Works
in both 50 and 60 Hz with operating air pressure at a MIN of 45 psi and Max of
85 psi.
Welder Specs: TIG and Arc Welder 1600 Amps DC Tig.
Welder: Duty Cycle 60% at 180 Amps ARC and 100% at 95 Amps ARC. Gas Flow: 2-5
L/Minute. It can weld all stainless steel. 160 Amps Arc Welder: Duty Cycle 60%
at 95 Amps and 100% at 90 Amps. DC welders do not weld aluminum.
High Frequency and Contact Start: High Frequency DC Plasma cuts thicker
materials than standard DC plasma cutters. This 40amp Inverter Plasma cutter
cuts like a 60amp standard DC plasma cutter!!! High Frequency Plasma cuts faster
with less distortion in your metal.
Internal
High Speed Cooling Fan to Regulate Temperature. Unit has built in Thermal and
Overload Protection Weight: 40Lbs (44LBS Boxed) Dimensions: 19” Length x 8”
width x 12”